Mitsubishi Electric LGH-15RX5 -E Instruction Manual page 88

• If the remote controller Function Selection mode is entered during timer operation, the timer operation will be cancelled. Set timer operation after
completing the remote controller Function Selection mode.
• When using two remote controllers, if one remote controller is set to remote controller Function Selection mode, "
the other remote controller and its operation will be disabled.
• Button response may at times be slow due to communication processing; this is not a malfunction.
Normal display (Display when
the Lossnay unit is not running)
(Hold down the
the button for 2 seconds.)
C
Item 1
Press the
B button.
Change Language
("CHANGE LANGUAGE")
Function limit
("FUNCTION
Press the
SELECTION")
B
button.
Press the
A
button.
Mode selection
("MODE
Press the
SELECTION")
B
button.
Press the
A
button.
Display change
("DISP MODE
Press the
SETTING")
B
button.
Press the
button.
A
*
3
Installation settings
("LOSSNAY
Press the
FUNCTION")
B
button.
Press the
button.
A
*
3
Interlocking settings
("INTERLOCK
Press the
SETTING")
B
button.
Press the
button.
A
Press the
A
button.
Change Language
("CHANGE LANGUAGE")
* For the Lossnay models without those functions, those setting items will be nondisplay.
1
* Those settings can be disabled depending on the other setting conditions.
2
* When two remote controllers are used, the settings will be displayed only in the main remote controller.
3
C-88
(Hold down the
A button and press
and press the
2 seconds, or
Remote Controller Function Selection Mode
Operation function limit setting ("LOCKING FUNCTION")
* * * 24-hour ventilation setting ("24HR VENTILATION")
1 2 3
Use of clock setting ("CLOCK")
Timer function setting ("WEEKLY TIMER")
Contact number setting for error situation ("CALL.")
Filter cleaning setting ("MAINTENANCE SIGN")
Lossnay cores cleaning setting ("MAINTENANCE SIGN")
SA (Supply Air) Temperature display setting ("TEMPERATURE DISP")
OA (Outdoor Air) Temperature display setting ("TEMPERATURE DISP")
RA (Room Air) Temperature display setting ("TEMPERATURE DISP")
Temperature exchange efficiency setting ("EXCHANGE EFFICIENCY")
Supply fan speed setting ("SA SETTING")*
Exhaust fan speed setting ("EA SETTING")*
Power supply / exhaust when operation starts ("POWER VENT START")
Subordinate Lossnay settings ("
Power supply ON/OFF/AUTO ("RECOVERY SETTING")
Operation monitor output selection ("OPERATION MONITOR")
Exhaust fan speed selection for cold region intermittent operation ("EA SETTING INTERMIT")
Night purge setting ("NIGHT PURGE")*
Bypass automatic ventilation priority setting ("BYPASS SETTING")
Interlock mode setting ("INTERLOCK MODE")
Pulse input setting ("INPUT SIGNAL")
Delayed operation settings ("DELAY OPERATION")
Exhaust operation settings for air conditioner defrosting ("EA SETTING DEFROST")
NOTE
To return to the normal display,
button
A hold down the
C button for the button for 2 seconds.
C
button)
L
Item 2
1
1
SET")
SUB
2
" will be displayed in
Dot display
The language that is selected
button and press
A
in CHANGE LANGUAGE
mode appears on this display.
English is set in this manual.
(Setting content)
Press the button.
B
Press the B button.
Press the button.
B
Press the button.
E
Press the button.
B
Press the B button.
Press the B button.
Press the button.
B
Press the button.
B
See [1] (1)
Item 3
See [2] (1)
See [2] (2)
See [3] (1)
See [3] (2)
See [3] (3)
See [4] (1)
See [4] (2)
See [4] (3)
See [4] (4)
See [4] (5)
See [4] (6)
See [5] (1)
See [5] (2)
See [5] (3)
See [5] (4)
See [5] (5)
See [5] (6)
See [5] (7)
See [5] (8)
See [5] (9)
See [6] (1)
See [6] (2)
See [6] (3)
See [6] (4)