Mitsubishi Electric LGH-15RX5 -E Instruction Manual page 105

9 Press the "Timer/continuous" button (shown as E) again. The display will now alternate between the registered unit and the
address of the next registered unit. (Display is the same as in step 8.)
0 To return to the normal operation mode.
Press and hold down the [FILTER] button (shown as A) and the "Louver" button (shown as B) simultaneously to return the
unit to the normal operation mode (OFF).
15.3.5 To delete linked unit entries
A From the initial registration mode display, perform an address search for linked units. Display the addresses of the Lossnay
units to be deleted. Press the "Time conversion" button (shown as F) twice to delete these units, which are displayed
according to their address number with the indoor unit.
When the above is displayed, press the "Time conversion" button (shown as F) twice.
If there is a transmission error, the properties will flash as "
again.
B To return to the normal operation mode.
Press and hold down the [FILTER] button (shown as A) and the "Louver" button (shown as B) simultaneously to return the
unit to the normal operation mode (OFF).
Address of another
registered unit
Address of the
registered unit
Address of the
registered unit
INDOOR UNIT
ADDRESS NO. OA UNIT ADDRESS NO.
(Alternation)
INDOOR UNIT
ADDRESS NO. OA UNIT ADDRESS NO.
INDOOR UNIT
ADDRESS NO. OA UNIT ADDRESS NO.
(Alternation)
INDOOR UNIT
ADDRESS NO. OA UNIT ADDRESS NO.
INDOOR UNIT
ADDRESS NO. OA UNIT ADDRESS NO.
(Alternation)
INDOOR UNIT
ADDRESS NO. OA UNIT ADDRESS NO.
". Check the wiring and the address, then perform step A
C-105