Mitsubishi Electric LGH-15RX5 -E Instruction Manual page 12

4.4.3 Operation with two Remote controllers
Characteristics
• Lossnay can be operated from two remote locations.
• Lossnay conditions can be checked from two remote Lossnay remote controller
locations.
• The remote controller gives priority to the last touch.
System Example
Operation Method
The operation is the same with each remote controller. In this case, the Lossnay gives operating priority to the last button push.
C-12
Transmission
cable extension
is 500 m or less
0.65 to 1.2
PVC cable or
2 2
0.3 mm to 1.25 mm
strand wire.
Remote controller
PZ-60DR-E or PZ-41SLB-E
Transmission
cable extension
is 500 m or less
0.65 to 1.2
PVC cable or
2 2
0.3 mm to 1.25 mm
strand wire.
Remote controller
PZ-60DR-E or
PZ-41SLB-E
Remote controller
PZ-60DR-E, PZ-41SLB-E
Lossnay Lossnay
Power supply Power supply
Lossnay Lossnay
Power supply Power supply
Remote controller
PZ-60DR-E or PZ-41SLB-E
Lossnay
Power supply
Remote controller
PZ-60DR-E or
PZ-41SLB-E
Note
• Use only up to two remote controllers
(Operation will not go normally if three
remote controller switches are con-
nected.)
MAX 15 units.
MAX 15 units.
Lossnay
Power supply