At A Glance; Preparation And Start; Changing The Programme; Aborting A Programme - Blomberg TKF 1330 Instruction Manual

AT A GLANCE

Preparation and start

1. Put laundry in the drum and close the
door.
2. Turn the appliance on by pressing
On/Off button
3. Set the programme selector.
4. If desired set delay timer
5. Press the >Start< button.

Changing the programme

When changing to a different pro-
gramme the running programme must
be stopped first.
To do so the >Start< button must
be pressed for 2 sec. in order to cancel
programme.

Aborting a programme

Do not turn appliance off during the
heating phase (indicator >Drying
is on). Risk of heat accumulation!
1. First stop the running proramme (press
the >Start< button for 2 seconds.
2. Set the programme selector to
>Fluff/Refresh<
3. Press the >Start< button.
4. Wait for the programme cycle to end.

Adding more laundry

This makes only sense at the begin-
ning of a drying cycle, otherwise the
result will be a mixture of not quite
dry and too much dried textiles.
1. Press pause button.
2. Put laundry in the drum and close the
door.
3. Press the >Start < button.

Laundry final drying

1. Set the programme selector to one of
the timed programmes
>40min<, >20min<
2. Press the >Start< button.
<
>60min<,
or >10min<

Programme end

The programme cycle has completed
when the indicators >Stop/Anti-Ceasing
and >Clean fluff filter
Throughout the anti-crease stage
the indicator >Stop/Anti-Ceasing
is on. The programme can then be
ended at any time.
1. Open door, remove laundry, check
drum for foreign objects.
2.
Press »On/Off« button
3.After every drying cycle :
– Clean the fluff filter (see "Fluff fil-
ter").
4.After approx. 50 drying cycles
four times a year:
– Clean drum ribs (see "Drum ribs").
5. After approx. 20 drying cycles or twice
a month:
– Clean condenser.
6.When required :
– Clean housing and fascia using a
soft cloth and a mild soap; wipe dry
with a soft cloth.
Do not use scrubbers and scouring
powders! They will damage the plastic
parts and enamel.
When the door is opened during the
programme, the programme will be
paused automatically and the light on
the start button will flash. The start
button must be pressed again to
continue the programme.
12
<
< are illuminated.
<
.
or