Drum Ribs - Blomberg TKF 1330 Instruction Manual

To clean the condenser:
1. Open the door. Wait for the appliance
to cool down.
2. Open service door latch.
The service door will open. Then turn
the locking level .
3. Pull the condenser out at the handle.
4. Rinse condenser – vertically and hori-
zontally – thoroughly under running
water. Let water drain thoroughly.
5. Push condenser – with the lettering
embossed at the edge facing up – ful-
ly in, then fix the locking level.
6. Close the service door.

Drum ribs

At the rips on the inside of the drum are
moisture sensors, signalling to the appli-
ance when the textiles are dry.
Clean drum ribs
– after approx. 50 drying cycles, or
– four times a year.
To clean the drum ribs:
1. Open the door. Wait for the appliance
to cool down.
2. Wipe all drum ribs with a soft cloth
moistened with vinegar. Wipe dry with
a soft cloth.
Do not use solvents, naphtha or simi-
lar! Fire or explosion hazard!
11