NEC Aspila Topaz Programming Manual page 192

Program 21: Outgoing Call Setup
21-15:
Individual Trunk Group Routing for Extensions
Description
Use Program 21-15 : Individual Trunk Group Route for Extensions to designate the alternate trunk access route
accessed when a user dials the Alternate Trunk Route Access Code. Refer to Program 11-09-02 - Alternate Trunk
Access Code when setting up alternate trunk codes. Turn to Program 14-06 - Trunk Group Routing to set up the
trunk routes. When entering data for this option, enter the route number or 0 to prevent routing.
Input Data
Extension Number
Day/Night Mode
1-8
Conditions
None
Feature Cross Reference
Central Office Calls, Placing
Telephone Programming Instructions
To enter data for Program 21-15(Individual Trunk Group Routing for Extensions):
1. Enter the programming mode.
2. Enter 21 15
21-15-01 TEL200
Mode1=RouteTbl0
3. Enter the number of the item you want to program.
21-15-xx
TELxxxx
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Route Table Number
0-25 (0 : No setting)
184
Max. 4 digits
Default Related Program
11-09-02
0 14-01-07
14-06
IN
SA
SB