NEC Aspila Topaz Programming Manual page 137

IN
SA
20-03:
SB
Description
Use Program 20-03 : System Options for Single Line Telephones to set up various options for Single Line
Telephones.
Input Data
Prog. No. Item
20-03-01 SLT Call Waiting
Answer Mode
20-03-02 Ignore Received DP
Dial on DTMF SLT
Port
20-03-03 SLT DTMF Dial to
Trunk Lines
20-03-04 Trunk Call Dial
Sending Time by SLT
20-03-05 SLT Operation Mode
20-03-06 Headset Ringing
Cancel Time
Conditions
None
Program 20: System Option Setup
System Options for Single Line Telephones
Input Data
0 : Hook Flash For a busy Single Line
1 : Hook Flash + Telephone, set the mode used
Service code (894) to answer a camped-on trunk
call.
0 : Do Not Ignore Use this option to define
1 : Ignore whether the system should
receive dial pulse and DTMF
signals (0) or ignore dial
pulse and only accept DTMF
signals (1)
0 : Receive all Type 0 : The system keeps the
dialed data, before digits dialed by the SLT on a
sending trunk in a buffer. After all the
1 : Direct through digits have been received, the
out system sends all the digits to
the trunk. If the time space
between digits is longer than
the timer in Item 4, the system
considers all digits received.
Type 1 : The system
passes the received dial from
the SLT to the trunk
immediately. If the SLT has a
Last Number Dial key without
a pause, this key may not be
able to use the Last number
dialing key with the Type 1
setting.
0-64800(sec.)
0 : Normal Mode
1 : Extended
Mode1
2 : Extended
Mode2
0-64800(sec.)
129
Description Default
Programming Manual
Related
Program
0 11-12-47
0 15-03-01
0 20-03-04
3
0
5