NEC Aspila Topaz Programming Manual page 287

IN
Program
SA
SB
Description
Use Program 33-01 : Analogue Interface Port Type Setup to set the function of each software port on an
Analogue Communications Interface.
Each Analogue Interface Port can have only one function (input, output or none).
Input Data
Analogue Interface Port Number
1-6
Conditions
None
Feature Cross Reference
Analogue Interface Port
Telephone Programming Instructions
To enter data for Program 33-01 (Analogue Interface Port Type Setup):
1. Enter the programming mode.
2. Enter 33 01
33-01-01ACIPort1
ACI Type 0
3. Enter the number of the item you want to program.
33-01-xx ACIPortx
xxxxx
4. Select the Analogue Interface port number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
33: Analogue Interface Ports Setup
33-01 Analogue Interface Port Type Setup
Analogue Interface Port Type
0 : No setting
1 : Input
2 : Input/Output
3 : BGM Input
4 : EXMOH Input
279
Related
Default
Program
0
Programming Manual