NEC Aspila Topaz Programming Manual page 288

Program 33: Analogue Interface Ports Setup
33-02: Analogue Interface Group Assignment
Description
Use Program 33-02 : Analogue Interface Group Assignment to assign Analogue Interface Ports (1-6) to
Department Groups. There are 4 ACI Department Groups. An ACI port can only be in one group.
Also use this program to set the ACI port's priority. When a call comes into the ACI Department Group, it connects
to the ACI port in order of their priority. A higher priority port (e.g., 1) receives calls before a lower priority port
(e.g., 6).
Input Data
Analogue Interface Port Number
1-6
Default
Analogue Interface Port
1
2
:
6
Conditions
None
Feature Cross Reference
Analogue Interface Port
Telephone Programming Instructions
To enter data for Program 33-02 (Analogue Interface Group Assignment):
1. Enter the programming mode.
2. Enter 33 02
33-02-01ACIPort1
ACI Group No 1
3. Enter the number of the item you want to program.
33-02-xx ACIPortx
xxxxx
4. Select the Analogue Interface port number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Programming Manual
Group Number
1-4
Group Number
1
1
:
1
280
Priority Default
1-6 See "Default"
Priority Order
1
2
:
6
IN
SA
SB