NEC Aspila Topaz Programming Manual page 189

IN
SA
SB
COPY
Description
Use Program 21-12 : ISDN Calling Party Number Setup for Trunks to assign Calling Party Numbers for each
trunk (maximum 16 digits per entry). When a call is made by an extension which does not have an Extension
Calling Number assigned (Program 21-13), the system sends the calling number for the ISDN trunk defined in 21-
12.
If the Calling Party Number is assigned in both Programs 21-12 and 21-13, the system sends the data in
Note:
Program 21-13.
Input Data
Trunk Port Number
Calling Party Number
0-9,*,# (Max. 16 digits)
Conditions
None
Feature Cross Reference
ISDN Compatibility
Telephone Programming Instructions
To enter data for Program 21-12(ISDN Calling Party Number Setup for Trunks):
1. Enter the programming mode.
2. Enter 21 12
21-12-01 Trunk1
PartyNo
3. Enter the number of the item you want to program.
21-12-xx Trunkxx
xxxxx
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 21: Outgoing Call Setup
21-12:
ISDN Calling Party Number Setup for Trunks
No setting
181
1-51
Default
Programming Manual