NEC Aspila Topaz Programming Manual page 144

Program 20: System Option Setup
20-08:
Class of Service Options (Outgoing Call Service)
Description
Use Program 20-08 : Class of Service Options (Outgoing Call Service) to define the Outgoing call feature
availability for each extension's Class of Service.
Input Data
Class of Service Number
Prog. No.
20-08-01 Intercom Calls
Enable/disable Intercom calling for the extension.
20-08-02 Trunk Calls
Enable/disable outgoing trunk calling for the extension.
20-08-03 Common Abbreviated Dialing
20-08-04 Group Abbreviated Dialing
20-08-05
Dial Number Preview
Enable/disable an extension's ability to use Dial Number
Preview.
20-08-06 Toll Restriction Override
Enables/disables Toll Restricting Override (Service Code
875).
20-08-07 Repeat Redial
Enables/disables an extension's ability to use Repeat
Redial.
20-08-08
Toll Restriction Dial Block
Enable (1) or disable (0) an extension's ability to use Dial
Block.
20-08-09 Hotline/Extension Ringdown
Enables/disables Ringdown Extension for extensions
with this COS.
20-08-10
Switching from Handsfree Answerback to Forced
Intercom Ringing
Enables/disables an extension's ability to force Handsfree
Answerback or Forced Intercom Ringing for outgoing
Intercom calls.
20-08-11
Protect for the call mode switching from caller
(Internal Call)
20-08-12 Department Group Step Calling
Enables/disables an extension's ability to use Department
Group Step Calling
20-08-13
CLIP
Set calling Party Number
Call Sub-Address Information
20-08-14
Programming Manual
Item
136
01-15
Input Data Default*
1
1
1
1
1
1
1
0 : Off
0
1 : On
0
1
0
1
1
0
IN
SA
SB
Related
Program
21-01-07
21-07
10-03-05