NEC Aspila Topaz Programming Manual page 360

Program 90: Maintenance Program
90-02: Setting the Programming Password
Description
Use Program 90-02 : Setting the Programming Password to set the system passwords. For password entry
purposes, the system allows 8 users to be defined. Each user can have a:
• Unique alphanumeric name (up to 10 alphanumeric characters long.
• Password entry of up to 8 digits (using 0-9, # and *)
• Password level
The "IN" level password is used by the "System Installer" for system programming purposes. The "SA" or "SB"
level password cannot access the "IN" level programs. The reverse type (white on black) just beneath the
Description heading is the program's access level. You can only use the program if your access level meets or
exceeds the level the program requires. ("SA" level password can access to "SA" or "SB" programs, and "SB" level
password can access to "SB" programs only.)
!! Caution !!
It is NOT recommended to change this data unnecessarily. If the digits are changed and then forgotten, there may be
no normal way to enter the program mode again.
Input Data
User Number
Prog.No. Item
90-02-01 User Name
90-02-02 Password
90-02-03 User Level
Default
User No. User Name
1 NEC-I
2 TOPAZ
3 ADMIN1
4 ADMIN2
5 -Not Used-
6 -Not Used-
7 -Not Used-
8 -Not Used-
Conditions
Two extensions can be in the programming mode.
Programming Manual
Max. 10 characters
Up to 8 digits
0- Prohibited user
1- MF (Manufacturer level - for NEC-i use only)
2- IN (Installer level)
3- SA (System administrator level 1)
4- SB (System administrator level 2)
Password Level
- 1 (MF)
12345678 2 (IN)
0000 3 (SA)
9999 4 (SB)
-Not Used- -
-Not Used- -
-Not Used- -
-Not Used- -
352
1-8
Input Data
Level Description
Blocked User (Manufacturer
programming access only)
Installer Level - Access to all programs
this manual
System Administrator Level 1 -
Restricted access
System Administrator Level 2 - More
restricted access
IN
SA
SB
Related
Program