NEC Aspila Topaz Programming Manual page 383

IN
SA
90-26:
SB
Description
Use Program 90-26 : System Data Programming Level Setup to define the programming access level of each
command.
Input Data
Program Number
Prog.No.
90-26-01 Maintenance Level
Conditions
You can only set a level equal or lower than the level you are logged on. e.g. if you log on as installer you can not
set any to manufacturer level.
Feature Cross Reference
None
Telephone Programming Instructions
To enter data for Program 90-26 (System Data Programming Level Assignment):
1. Enter the programming mode.
2. Enter 90 26
90-26-01 PRG1001
Maintenance LVL3
3. Enter the number of the item you want to program.
90-26-xx PRGxxxx
xxxxx
4. Select the Program number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series's programming section.
Program 90: Maintenance Program
System Data Programming Level Assignment
Item
1 : MF(Manufacturing Level)
2 : IN(Installer Level)
3 : SA(System Administrator A)
4 : SB(System Administrator B)
375
1001-9201
Input Data
Programming Manual
Default
Refer to each
header of
Programming
Manual