Online Module Change Conditions - Mitsubishi Electric MELSEC-Q Series User Manual

7 ONLINE MODULE CHANGE

7.1 Online Module Change Conditions

To change the Q62HLC online, the following programmable controller CPU,
MELSECNET/H remote I/O module, GX Developer, and base unit are required.
(1) Programmable controller CPU
(2) MELSECNET/H remote I/O module
(3) GX Developer
(4) Base unit
7 - 2
The Process CPU or Redundant CPU is required.
For precautions for multiple CPU system configuration, refer to the QCPU User's
Manual (Multiple CPU System).
For precautions for redundant system configuration, refer to the QnPRHCPU
User's Manual (Redundant System).
The module with a function version D or later is required.
GX Developer Version 7.10L or later is required.
To perform an online module change on a remote I/O station, GX Developer
Version 8.18U or later is required.
(a) When the slim type main base unit (Q3 SB) is used, an online module
change cannot be performed.
(b) When the extension base unit (type requiring no power supply module)
(Q5 B) is used, an online module change cannot be performed for the
modules on all the base units connected.
REMARKS
The Q62HLC supports the online module change function from its original version
(function version C).
MELSEC-Q
7
7 - 2