Auto Refresh - Mitsubishi Electric MELSEC-Q Series User Manual

5 UTILITY PACKAGE (GX Configurator-TC)
5.5 Auto Refresh Setting
5 - 18
[Purpose]
Configure the Q62HLC buffer memory for automatic refresh in each channel.
For the automatic refresh setting types, refer to Section 5.1.
This auto refresh setting eliminates the need for reading and writing by sequence
programs.
[Operating procedure]
*1
"Start I/O No. "
*1: Enter the start I/O No. in hexadecimal.
[Setting window]
"Module type" "Module model name"
MELSEC-Q

Auto refresh

5 - 18