For Use On Remote I/O Network - Mitsubishi Electric MELSEC-Q Series User Manual

6 PROGRAMMING

6.3 For Use on Remote I/O Network

6 - 20
System configuration used in the program explanation
(1) System configuration
*1: Device numbers are on the basis of the remote I/O master station.
The following table lists the device numbers on the basis of the remote
station.
Module Device numbers on the basis of
QX42
QY42P
Q62HLC
(2) Program conditions
The programs are executed to control the temperature measured by the
thermocouple (K: -200 to 1372 ) connected to channel 1.
• According to input signals, normal control/program control/manual control 2
(simplified analog/digital conversion)/cascade control is executed.
• They include write data error code reading and error code resetting programs.
(3) Intelligent function module switch setting
Configure the intelligent function module switch setting as follows.
For details of the intelligent function module switch setting, refer to Section 4.5.
master station
X100 to X13F
Y140 to Y17F
X/Y180 to X/Y18F
MELSEC-Q
Device numbers on the basis of
remote station
X0 to X3F
Y40 to Y7F
X/Y80 to X/8F
6 - 20