Mitsubishi Electric MELSEC-A Series Manual page 66

2
REPLACEMENT OF MELSECNET (II) AND /B (PLC TO PLC NETWORK)
Network parameter setting is required for control and normal stations on MELSECNET/H.
The following shows parameters required on each station of MELSECNET/H.
(Network range assignment)
1Mp3
(Refer to example in (e) 2))
1Ns2
1Ns1
2Mp3
(Refer to example in (g) 3))
2Ns1
2Ns2
2
- 29
Station
Common parameter
inherent
parameter
: Setting required/
Refresh parameter
-
(Refer to example in (e) 3))
-
(Refer to example in (f) 2))
-
(Refer to example in (g) 2))
-
(Refer to example in (g) 4))
-
(Refer to example in (i) 2))
-
(Refer to example in (i) 2))
: Setting required (Default setting is also acceptable)/ -: Setting not required
Inter-link data transfer
(Refer to example in (h) 1))