Parameter Comparisons - Mitsubishi Electric MELSEC-A Series Manual

5
REPLACEMENT OF THE MELSECNET/10 (REMOTE I/O NETWORK)

5.1.5 Parameter comparisons

(1) Parameter of remote master station
Parameter
A/AnS/QnA/QnAS series
name
MELSECNET/10 module
Network type
Starting I/O No.
Network No.
Total number of (slave) stations Total number of (slave) stations
Network
Network range
parameter
assignment
(common
parameter)
Refresh parameters
Routing parameters
Valid module during other
station access
5
- 24
Description
Q series
MELSECNET/H module
Network type
Starting I/O No.
Network No.
- Mode
Monitoring time
BW setting
XY setting
Network range
Reserved
assignment
station
(common
designation
parameter)
I/O assignment
setting
Supplemental
settings
Refresh parameters
Routing parameters
Valid module during other
station access
: Compatible, : Partial change required, × : Incompatible
Compat-
Precautions for replacement
ibility
Set the mode in GX Works2 or GX
Developer network parameters.
Monitoring time
BW setting
XY setting
Reserved
station
designation
Set with the PLC parameter of
-
each remote I/O station.
Supplemental
settings