Mitsubishi Electric MELSEC-A Series Manual page 158

4
REPLACEMENT OF THE MELSECNET/10 (PLC TO PLC NETWORK)
(3) Parameter of standby station
Parameter
name
MELSECNET/10 module
Network type
Starting I/O No.
Network No.
Network
parameter
Standby station compatible
module
Routing parameters
Valid module during other
station access
*1 Standby station is a station type of simple dual-structured system.
Only the following CPU modules support the simple dual-structured system.
• Process CPU
4
- 17
*1
Description
QnA/QnAS series
MELSECNET/H module
(MELSECNET/10 mode)
Network type
Starting I/O No.
Network No.
- Group No.
- Mode
Standby station compatible
module
Routing parameters
Valid module during other
station access
: Compatible,
Q series Compat-
ibility
Set the group No. in GX Works2 or
GX Developer network parameters.
Set the mode in GX Works2 or GX
Developer network parameters.
: Partial change required, ×: Incompatible
Precautions for replacement