Mitsubishi Electric MELSEC-A Series Manual page 192

5
REPLACEMENT OF THE MELSECNET/10 (REMOTE I/O NETWORK)
(3) Parameter of multiplexed remote sub-master station
Parameter
name
MELSECNET/10 module
Network type
Starting I/O No.
Network No.
Network
parameter
Refresh parameters
Routing parameters
Valid module during other
station access
*1 The multiplexed remote sub-master station is the station type of the multiplex master system.
Only the following CPU modules support the multiplex master system.
• Process CPU
• Redundant CPU
5
- 26
Description
QnA/QnAS series
MELSECNET/H module
Network type
Starting I/O No.
Network No.
- Total number of (slave) stations
- Group No.
- Mode
Network range
assignment
-
(common
parameter)
Refresh parameters
Routing parameters
Valid module during other
station access
*1
: Compatible, : Partial change required, × : Incompatible
Compat-
Q series
ibility
Monitoring time
BW setting
XY setting
Reserved
station
designation
Remote sub-
master station
specification
Supplemental
settings
Precautions for replacement
New parameter of MELSECNET/H
(To enable the multiplexed remote
sub-master station to control the
remote I/O station, the setting is
required.)
The group No. is not used in the
remote I/O network.
Set to [0].
Set the mode in GX Works2 or GX
Developer network parameters.
New parameter of MELSECNET/H
(To enable the multiplexed remote
sub-master station to control the
remote I/O station, the setting is
required.)