Mitsubishi Electric MELSEC-A Series Manual page 228

6
REPLACEMENT OF CC-LINK
(b) Output signal
Output signal
AJ61QBT11/A1SJ61QBT11
Yn0 Refresh specification
Yn1
Yn2 Prohibited to use
Yn3
Yn4 Module reset request
Yn5 Prohibited to use
Data link startup request from
Yn6
buffer memory parameters
Yn7 Prohibited to use
Data link startup request from
Yn8
2
E PROM parameters
Yn9 Prohibited to use
Parameter registration request to
YnA
2
E PROM
YnB
Prohibited to use
YnC
2
YnD
E PROM erasure request
YnE
YnF
Y(n+1)0
Y(n+1)1
Y(n+1)2
Y(n+1)3
Y(n+1)4
Y(n+1)5
Y(n+1)6
Prohibited to use
Y(n+1)7
Y(n+1)8
Y(n+1)9
Y(n+1)A
Y(n+1)B
Y(n+1)C
Y(n+1)D
Y(n+1)E
Y(n+1)F
6
- 15
Signal name
QJ61BT11N
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
Prohibited to use
: Compatible, : Partial change required, × : Incompatible
Compat-
Precautions for replacement
ibility
Refreshed automatically. Delete the sequence
program of the section corresponding to the
function.
Delete the sequence program of the section
corresponding to the function.
× When the switch setting is changed, turn the power
supply of programmable controller system OFF 
ON or reset the programmable controller CPU.
Delete the sequence program of the section
corresponding to the function, and set parameters
with GX Works2/GX Developer or with dedicated
instruction (RLPASET instruction).
Delete the sequence program of the section
corresponding to the function, and set parameters
with GX Works2/GX Developer or with dedicated
instruction (RLPASET instruction).
Delete the sequence program of the section
corresponding to the function, and set parameters
with GX Works2/GX Developer or with dedicated
instruction (RLPASET instruction).
Delete the sequence program of the section
corresponding to the function, and set parameters
with GX Works2/GX Developer or with dedicated
instruction (RLPASET instruction).