Mitsubishi Electric MELSEC-A Series Manual page 55

2
REPLACEMENT OF MELSECNET (II) AND /B (PLC TO PLC NETWORK)
A MELSECNET/H module set as normal station requires network parameter setting. For replacement of
MELSECNET (II) module mounted on the CPU module of the AnN/AnA/AnSCPU (excluding
AnUS(H)CPU), newly set network parameters.
The following shows parameters required on each station of MELSECNET/H.
(Network range assignment)
1Mp1
1Ns2
1Ns3
1Ns4
(a) MELSECNET II master station
The following shows the network parameter settings of the MELSECNET II master station
(A3ACPU).
1) Network parameter setting (A3ACPU: MELSECNET II master station)
2) Network range assignment (A3ACPU: MELSECNET II master station)
Common parameter
(Refer to example in (b) 2))
Station inherent parameter
(Refer to example in (b) 3))
(Refer to example in (c) 2))
(Refer to example in (c) 2))
(Refer to example in (c) 2))
: Setting required/ : Setting required (Default setting is also acceptable)
Refresh parameter
(Refer to example in (b) 4))
(Refer to example in (c) 3))
(Refer to example in (c) 3))
(Refer to example in (c) 3))
2
- 18