Sony HDS-7150 Installation Manual page 35

HDS-7150/7100
2-7. Description of Switches and LEDs on Boards
S1 (Q-8) : Mode setting switch
This switch is used for the factory setting. Set all knobs to ON position for normal operation.
n
indicates the knob position.
ON
1 2 3 4 5 6 7 8
COP2, COP3, COP4, COP5, COP6, and COP7 (P-7) : Mode setting connector pin
These jumpers are used for the factory setting. Connect the pin headers as shown in the figure on the
previous page.
CN5 (M-3) and CN8 (Q-7) : Connectors for the factory setting.
These connectors are used for the factory setting.
2-19
HDS-7150/7100