Sony HDS-7150 Installation Manual page 139

d. Press the function key corresponding to the desired frequency mode (see the below table).
Frequency
Function key
MORE (F6)
The function key indication changes as follows.
e. Press [F5] (YES).
The function key indication returns to the state of step "b" or "c" and SELECT is displayed under the
selected frequency mode.
Setting the screen switching timing
n
This setting is valid only when the frequency mode is set to 60, 59.94, or 50.
a. To continue the setting after setting the number of scanning lines, the aspect ratio of the screen, or the
frequency mode, press the EXIT button.
The SYSTEM SETUP menu is displayed.
If the SYSTEM SETUP menu is already displayed, perform the setting from step "b".
b. On the SYSTEM SETUP menu screen, press [F5] (SWITCH).
The function key indication changes as follows.
c. To set the field to ANY, press [F2] (ANY).
To set the field to F1, press [F3] (F1).
To set the field to F2, press [F4] (F2).
SELECT is displayed under the selected field.
HDS-7150/7100
60 59.94
F2 F3
1/2
SYSTM Would you like
FREQ
F1 F2 F3
SYSTM ANY F1
SELECT - - - - -
SWTCH
F1 F2 F3
50 30 25
F4 F2 F3
to change FREQ?
YES NO
F4 F5 F6
F2
- - - - -
F4 F5 F6
24 23.98
F4 F5
2/2
HDS-7100
10-3. Set-up
10-11