Sony HDS-7150 Installation Manual page 142

HDS-7100
10-3. Set-up
10-3-5. Assigning of the Key Source to the Key Fill
(When the Key Source Auto Select Mode is Selected)
(1) On the set-up menu screen, press the function keys in the following sequence.
[F3] (INPUT) → [F3] (AUTO)
The AUTO SELECT ASSIGN menu is displayed.
(2) While pressing [F2] (FILL), press an AUX button to select a fill button.
The number of the selected fill button appears on the [F2] screen.
The key source button assigned to the fill button appears on the [F3] screen.
(3) While pressing [F3] (SOURCE), press an AUX button to select the key source to be assigned to the
fill button selected at step (2).
The number of the selected key source appears on the [F3] screen.
10-3-6. Adjusting the Input Signal
(1) On the set-up menu screen, press the function keys in the following sequence.
[F3] (INPUT) → [F4] (ADJUST)
The INPUT ADJUST menu is displayed.
(2) While pressing [F2] (BUTTON), press an AUX button to select a fill button.
The number of the selected fill button appears on the [F2] screen.
The state of the digital input signal assigned to the fill button appears on the [F4] screen.
(3) Rotate knob 4 to adjust the input H phase (normally set to 0).
10-14
INPUT FILL SOURCE
10 10
AUTO
F1 F2 F3
INPUT BUTTON PHASE
10
ADJ
F1 F2 F3
F4 F5 F6
F4 F5 F6
HDS-7150/7100