Connecting The Hds-7150/7100 With The Power Supply Unit - Sony HDS-7150 Installation Manual

1-2-4. Connecting the HDS-7150/7100 with the Power Supply Unit

w
. Never disconnect or connect the DC power cord (harness A and harness B) while the power of HKDS-
7695/7695A is on. It may cause fire or electric shock.
. Never use a DC power cord other than the supplied DC power cord. It may cause fire or electric shock.
The HDS-7150/7100 does not have a power switch and power indicator. For the power-on/off of the HDS-
7150/7100, use the power switch of the HKDS-7695/7695A.
One unit of the HDS-7150/7100 requires one or two units of the HKDS-7695/7695A.
The HDS-7150/7100 and the HKDS-7695/7695A are connected using the two specified DC power supply
cord, harness A (MB-PA2) and harness B (MB-PB2) that are supplied with the HKDS-7695/7695A.
(1) Connect the two AC power cords supplied with the HKDS-7695/7695A to an AC power source of 100 V to
120 V.
n
Connect the two AC power cords to the same AC power source.
(2) Connect the PROCESSOR A connector of the HKDS-7695/7695A to the POWER SUPPLY 1 A con-
nector of the HDS-7150/7100 using harness A (MB-PA2). Connect the PROCESSOR B connector of
the HKDS-7695/7695A to connector B of POWER SUPPLY 1 of the HDS-7150/7100 using harness B
(MB-PB2).
(3) Fix the harness connectors with screws. DC power voltages of 5 V, 3.3 V, _5 V, and 12 V are thus
supplied to the HDS-7150/7100.
HDS-7150/7100
1-2. Power Supply
1-3