Sony HDS-7150 Installation Manual page 141

10-3-4. Assigning of the Crosspoint
(1) On the set-up menu screen, press the function keys in the following sequence.
[F3] (INPUT) → [F2] (XPT)
The INPUT XPT ASSIGN menu is displayed.
(2) While pressing [F2] (BUTTON), press an AUX button.
The number of the selected button is displayed on the [F2] screen.
The signal assigned to the crosspoint button is displayed on the [F3] screen.
(3) Rotate knob 4 to display the signal to be assigned to the crosspoint button selected at step (2).
PRIM01-PRIM10 ............... HDS-7100 rear panel PRIMARY INPUT 1-10
BKGD ................................ Internally generated COLOR BKGD signal
BLACK ............................... Internally generated BLACK signal
PGM .................................. PGM (program) video output signal
DME1V .............................. Internal DME channel 1 video output signal
DME1K .............................. Internal DME channel 1 key output signal
DME2V .............................. Internal DME channel 2 video output signal
DME2K .............................. Internal DME channel 2 key output signal
CCR1 ................................. Color Correction channel 1 output signal
CCR2 ................................. Color Correction channel 2 output signal
(4) Press [F3] (SOURCE).
The selected signal is displayed on the [F3] screen.
HDS-7150/7100
INPUT BUTTON SOURCE
10 PRIM10
XPT
F1 F2 F3
LIST
PRIM10
F4 F5 F6
HDS-7100
10-3. Set-up
10-13