Sony HDS-7150 Installation Manual page 143

10-3-7. Adjusting the Outputs of the Entire System
(1) On the set-up menu screen, press [F4] (OUTPUT).
The OUTPUT menu is displayed.
(2) Rotate knob 2 to adjust the reference output (REF OUT) phase (normally set to 0).
10-3-8. Adjusting the Output Signal
(1) On the set-up menu screen, press the function keys in the following sequence.
[F4] (OUTPUT) → [F3] (ADJUST)
The OUTPUT ADJUST menu is displayed.
(2) Press [F2] (OUTPUT) to select the desired output signal.
The selected output signal appears on the [F2] screen.
The output is changed by pressing [F2] in the following sequence.
(3) Press [F3] (White).
Rotate knob 3 to adjust the white clip value of the luminance signal.
(4) Press [F4] (Dark).
Rotate knob 4 to adjust the dark clip value of the luminance signal.
HDS-7150/7100
SETUP REFPH ADJUST
OUT 0
F1 F2 F3
OUT OUTPUT White
PGM 0.0
ADJ
F1 F2 F3
PGM PVW CLEAN
THRU
F4 F5 F6
Dark
0.0
F4 F5 F6
AUX1 EDPVW
HDS-7100
10-3. Set-up
10-15