10-3-1. Confirmation of the Software Version
On the set-up menu screen, press the function keys in the following sequence.
[F2] (SYSTEM) → [F6] (MORE) → [F2] (INFO)
The versions of the software and the ROM installed in each equipment are displayed.
10-3-2. Setting about the System
(1) On the set-up menu screen, press the function keys in the following sequence.
[F2] (SYSTEM) → [F2] (SYSTEM)
The SYSTEM SETUP menu is displayed.
Setting the number of scanning lines
a. Press [F2] (LINE).
The function key indication changes as follows.
b. To set the number of scanning lines to 1035, press [F2] (1035).
To set the number of scanning lines to 1080, press [F3] (1080).
The function key indication changes as follows.
c. Press [F5] (YES).
The display returns to the state of step "a" and SELECT is displayed under the selected number of scanning lines.
HDS-7150/7100
SYSTM
LINE
SCREEN
1080
4 : 3
SYS
F1
F2
F3
SYSTM
1035
1080
- - - - -
LINE
SELECT
F1
F2
F3
Would
you
like
SYSTM
LINE
F1
F2
F3
FREQ
SWITCH
60
ANY
F4
F5
F6
F4
F5
F6
to
change
Line?
YES
NO
F4
F5
F6
HDS-7100
10-3. Set-up
10-9