Sony HDS-7150 Installation Manual page 115

Press the [F4] (SCREEN) key.
(6)
The function key indications change as follows.
F1
Press the [F4] (4:3) or [F5] (16:9) key according to the aspect ratio of the screen, and press the
(7)
[F10] (EXEC) key.
The function key indications return to the indications of step (1).
Press the [F5] (FREQ) key.
(8)
The function key indications change as follows.
23.98
F1
Press either the [F1] to [F7] key according to the frequency, and press the [F10] (EXEC) key .
(9)
The function key indications return to the indications of step (1).
(10) Press the [F6] (SWITCH TIMING) key to select the timing (field) when the video data is switched
by a crosspoint button.
Every time the key is pressed, the display changes in the following sequence.
n
The switching timing can be set only when the frequency mode is set to 50.00, 59.94, or 60.00.
ANY : Not fixed
F1 : First field
F2 : Second field
(11) Press the [F7] (RESUME) and [F8] (PANEL RESUME) keys to select the resume function.
Select the ON position when you want to start up the system with the setup immediately before
turning off the main power. When the resume function is selected to the OFF position, the unit starts
up in the saved status in "9-4. Saving Set-up Data to Nonvolatile Momory.
HDS-7150/7100
SCREEN
4:3 16:9
F2 F3 F4 F5
FREQ
24.00 25.00 30.00 50.00 59.94
F2 F3 F4 F5
EXEC
F8 F9 F10
F6 F7
60.00 EXEC
F6 F7 F8 F9 F10
ANY F1 F2
HDS-7150
9-3. Set-up
9-9