Table of Contents
Advertisement
Figure 48
7.
Push the Z
-A
AP
LERT
alarm
(Figure
29).
8.
Disconnect the alligator clips from the grounding
stud and the machine.
9.
Store the grounding stake in the holder at the
rear of the machine
Figure 49
If either the audible alarm or the strobe light failed
to trigger when you pushed the
them repaired before drilling with the machine.
R
button to stop the
ESET
(Figure
49).
button, have
TEST
Mounting a Fire
Extinguisher
Mount your fire extinguisher below the operator seat
(Figure
50).
Note:
A fire extinguisher is not provided with the
machine.
The recommended fire extinguisher is a dry chemical
fire extinguisher approved for class B and C fires.
g230009
Operate and maintain the fire extinguisher per the
instructions on the fire extinguisher.
Loading the Drill Pipes
Refer to the Software Guide for the procedure on
loading drill pipes into the pipe box or onto the drill
string.
Filling the Fuel Tank
g218966
Fuel Tank Capacity
114 L (30 US gallons)
Fuel Specification
Important:
Use only ultra-low sulphur diesel
fuel. Fuel with higher rates of sulfur degrades
the diesel oxidation catalyst (DOC), which causes
operational problems and shortens the service life
of engine components.
Failure to observe the following cautions may
damage the engine.
•
Never use kerosene or gasoline instead of diesel
fuel.
•
Never mix kerosene or used engine oil with the
diesel fuel.
46
Figure 50
g218948
Advertisement
Table of Contents
