2.0 BU-2H06D-7588 Mounting
Note: The BU-2H06D-7588 must be mounted so that connector P1 is facing down to guard
against water entering the wiring harness.
Note: The BU-2H06D-7588 uses an RP-TNC connection for the antenna. If extending the
antenna from the base unit, only a Cervis recommended extension cable kit should be used.
2
102mm (4") centers
118mm (4.7")
Figure 2. BU-2H06D-7588 Mounting Details
WSMB-7588 JEM Technical
115mm (4.57")
(0.29") dia.
7.4mm
WSMB-7588_ESM 2-3