Pre-Maintenance
Procedures
Using the
Battery-Disconnect Switch
Open the hood to access the battery-disconnect
switch.
Turn the battery-disconnect switch to the O
position to perform the following:
•
To energize the machine electrically, rotate the
battery-disconnect switch clockwise to the O
position
(Figure
74).
•
To de-energize the machine electrically, rotate the
battery-disconnect switch counterclockwise to the
O
position
(Figure
FF
Important:
Do not turn the battery-disconnect
switch to the O
FF
running. Ensure that the machine is shut off
before turning the battery-disconnect switch
to the O
position, as you may cause damage
FF
to the engine and/or machine.
Figure 74
1. Battery-disconnect switch
(O
position)
FF
N
74).
position while the engine is
2. Battery-disconnect switch
(O
position)
N
Raising the Machine
Use the following as points to jack up the machine:
Front of the machine—on the frame, on the inside of
each drive tire
or O
FF
N
1. Front jacking point (2)
Rear of the machine—at the center of the axle
(Figure
76)
g031667
1. Rear jacking point
63
(Figure
75)
Figure 75
Figure 76
g008996
g008995