Adjusting The Cutting Unit Anti-Scalp Rollers - Toro Groundsmaster 5900 Operator's Manual

Figure 25
Adjusting the Cutting Unit
Anti-Scalp Rollers
Mount the roller in the lower position when operating
at heights of cut greater than 51 mm (2 inches) and
in a higher position when operating at heights of cut
lower than 51 mm (2 inches).
g202202
Adjusting the Roller
1. Remove the roller shaft, screw, and nut securing
the roller to the deck bracket
1. Roller
g031063
2. Align the roller with the top holes and install the
shaft with the screw and nut
1. Roller
33
(Figure 26).
Figure 26
2. Roller shaft, screw, and
nut
(Figure 27).
Figure 27
2. Roller shaft, screw, and
nut
g033107
g033108