Setup; Removing The Wing-Deck-Shipping Straps And Braces - Toro Groundsmaster 5900 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Declaration of conformity
Ignition keys
Note:
Determine the left and right sides of the
machine from the normal operating position.
Description
No parts required
Right deck cover
Left deck cover
V-belt
No parts required
No parts required
No parts required
No parts required
No parts required
Production-year decal
Qty.
–
1
1
2
–
–
–
–
–
1
Qty.
1 Review it before operating the machine.
1 Use it to reference engine information.
1
For CE compliance
2 Start the engine.
1
Removing the
Wing-Deck-Shipping Straps
and Braces
No Parts Required
Procedure
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key.
16
Use
Remove the wing-deck-shipping straps
and braces.
Lower the front-deck winglets.
Check the tire and caster wheel
pressure.
Level the front, center cutting unit.
Level the winglet decks to the front,
center deck.
Check the fluid levels.
Grease the machine.
Install the decal (CE machines only).
Use