Toro Groundsmaster 5900 Operator's Manual page 78

Figure 112
1. Rear shroud
6. Remove the fasteners that secure the battery
cover to the machine and remove the cover
(Figure 113).
Note:
Make note of how and where the battery
cables are installed.
7. Loosen and remove the battery cables from the
batteries.
8. Remove the fasteners that secure the
battery-hold downs.
9. Carefully remove the batteries from the machine
(Figure 113).
g199826
2. Flange screw
1. Battery cover
2. Battery-disconnect switch
3. Batteries—12 V (for 12
VDC system)
4. Batteries—12 V (for 24
VDC system)
5. Positive (+) cable (for 12
VDC system)
78
Figure 113
6. Cable assembly (for 24
VDC system)
7. Cable - jumper (for 24
VDC system)
8. Ground cable (-)
9. Battery hold down
10. Battery hold down
g199822