Room Numbering - NEC NEAX2400 IMX Features Manual

R-17
R-17
General Description
This feature enables flexible assignment of station numbers based on the guest ROOM NUMBERING plan.
Operating Procedure
Guest room calls are completed in the same manner as calls to ordinary stations.
Service Conditions
1. The same station number cannot be assigned to more than one station in the system.
2. Guest numbers must be contained within Tenant 1.
3. One-, two-, three-, four-, or five-digit station numbering may be used.
4. TIMING START [T-21] is available with this feature.
5. If TIMING START [T-21] is used, the characters * and # cannot be included as part of the station numbers.
6. Within the system programming, it is possible to match the station number with the room number, using
up to a five-digit station number.
For example:
Station Number:
7. If PMS is equipped, * and # cannot be included as part of the station number.
8. When separate number plans are used for guest and administration stations, the guest stations will require
an access code assigned in AGSP to complete calls to an Administration Station. Administration stations
can call guest stations directly.
9. Selecting common or separate numbering plans must be done at the time of PBX installation. Once the
selection is made DO NOT split or combine the numbering plan.
10. The leading digit of a guest room number display on the H/M Console and the Special Administration
stations can be replaced by the # sign. This way, room numbers will be more easily recognized (for
example, #101 rather than 7101).
Page 124

Room Numbering

Room Numbering
7
77
777
7777
77777
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2