Split Access - NEC NEAX2400 IMX Features Manual

S-17
General Description
This feature allows stations which are differentiated by Guest/Administration data, CLASS OF SERVICE –
INDIVIDUAL [C-15] data (Service Feature Class, Telephone Equipment Class, Route Restriction Class) or Day/
Night information to dial the same access codes but access different service features or trunk routes.
Operating Procedure
System data programming is performed from the MAT.
Service Conditions
1. TOLL RESTRICTION – 3/6 DIGIT [T-7] must be assigned for guest and Administration stations
individually from the MAT.
2. Attendant-assisted calls for guest stations can be provided on a delay or non-delay basis (refer to NON-
DELAY OPERATION [N-3]). If delay service is required, connection to the guest must be ended prior to
establishing the outside call.
3. Day/Night change is to be made either by the NITE key on the Hotel Console or the Day/Night assignment
command (ADNR) for hotel service. This selection is to be made on a system basis. To change Day/Night
mode, the Hotel Console must be used.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2

Split Access

Split Access
S-17
Page 125