Guest Room Calling - Hotel Attendant - NEC NEAX2400 IMX Features Manual

G-11 Guest Room Calling – Hotel Attendant
General Description
This feature allows the Console operator to display guest room information before calling a guest room.
Operating Procedure
Step
The attendant answers an incoming call.
1
The attendant dials the guest's room number.
2
The attendant presses the START key or DSS
3
key.
Service Conditions
1. This feature is not effective when calling an Administration Station. When an Administration Station is
called, the station is rung immediately after the dialing is completed by the Console.
2. The guest station status indication on the DSS lamp is the status at the time when the guest station number
is dialed. This status display is not updated.
3. The correspondence between DSS keys and suite station numbers is shown below:
a.) When a guest station is called, the START key is used for an ordinary guest room; whereas in the
case of a suite, the START key is used to call all stations, and a DSS key for an individual
station.
b.) DSS key/station correspondence and lamp indications are shown on the following page.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Guest Room Calling – Hotel Attendant
Action
The guest room information is displayed on the
Console. Guest station status is indicated on the Direct
Station Selection (DSS) lamp.
The guest room rings.
Result
G-11
Page 91