NEC NEAX2400 IMX Features Manual page 17

Special Service Access Numbers (cont'd)
Examples:
Guest Station on the 1st Floor of the main building
dial "7" Calling
→ Room Service Station (STN 4801) on the 1F
Guest Station on the 2nd Floor of the main building
dial "7"
→ Calling Room Service Station (STN 4802) on the 2F
Guest Station on the 3rd Floor of the main building
dial "7"
→ Calling Room Service Station (STN 4803) on the 3F
d.) Table 2-1 shows a listing of special services which require Access numbers.
Note:
In a case where both Entry and Cancel are specified for the same special service, different Access numbers must be
assigned for Entry and for Cancel.
Trunk Access Numbers
a.) Trunk Access numbers ranging from one through six (1-6) digits may be assigned on an
individual basis. Usually, one through three (1-3) digits are used.
Name of Special Service
Account Code Dial
Attendant Manual Override
Authorization Code/Forced
Account Code Dial
Automatic Wake Up – Set
Automatic Wake Up – Cancel
Busy Out – Entry (UCD)
Busy Out – Cancel (UCD)
Call Back – Entry
Call Back – Cancel
C.F. – All Calls – Entry
C.F. – All Calls – Cancel
C.F. – Busy Line – Entry
C.F. – Busy Line – Cancel
C.F. – Don't Answer – Entry
C.F. – Don't Answer – Cancel
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Table 1 Special Services Requiring Access Numbers
Remarks Name of Special Service
Faulty Trunk Report
Flash Signal Sending (CAS Main
Station)
Floor Service
Group Announcement – Entry
Group Announcement – Cancel
Guest/Administration Service
Hotel Service
Individual Speed Calling: Entry
Individual Speed Calling: Access
Individual Trunk Access
Line Load Control: Entry
Line Load Control: Cancel
NUMBERING PLAN
Remarks
Page 5