NEC NEAX2400 IMX Features Manual page 29

Operating Procedure (cont'd)
b.) If the wake-up time is entered after the guest line is released:
Step
Press WUS key.
1
Dial wake-up time.
2
Dial the guest station number.
3
Press the ENTER key.
4
Press the EXIT key.
5
• To cancel AUTOMATIC WAKE-UP from the Front Desk Terminal or Console using the WUS/WUR (Wake-Up
Set/Wake-Up Reset) key:
a.) When guest calls to cancel a wake-up call (see DIRECT SERVICE SET/RESET [D-25]):
Step
Press the WUR key while still connected with the
1
guest room.
b.) If the wake-up cancel is input after the guest line is released:
Step
Press WUR key.
1
Dial guest station number.
2
Press the ENTER key.
3
4 Press the EXIT key.
• To call the guest station that does not answer the wake-up call, from the Console.
Step
The guest does not answer the wake-up call.
1
Press the WU key or ANSWER key.
2
Press the START key.
3
If the guest does not answer, release the call by
4
pressing CANCL key.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Automatic Wake-Up
Action
Action
Action
Action
HH:MM
DEST TN:X CLS:X XXXX
No. XXXX
The associated lamp lights.
The console displays the entered time.
The console displays the station number.
The lamp flashes to confirm that AUTOMATIC
WAKE-UP has been set.
The lamp and station display are extinguished.
The associated lamp lights.
The console displays the station number and the
AUTOMATIC WAKE-UP time set.
The lamp flashes to confirm the cancellation of
the wake-up call.
The lamp and station display are extinguished.
The call is routed to Attendant and terminates on
the WU key.
The following is displayed:
NAME :NANS
OCPD
The guest station is rung.
The guest number is given to the front desk clerk
and he/she is asked to visit the guest room.
Result
Result
Result
Result
Page 17
A-10