NEC NEAX2400 IMX Features Manual page 60

C-32
Operating Procedure (cont'd)
Step
a.) Continued.
b.) Lift handset and answer the call. The display stops flashing.
Service Conditions
1. When a call terminates to a line other than the prime line, the LCD displays the incoming station as
determined by LINE PRESELECTION – D
2. LINE PRESELECTION – D
returns to TIME DISPLAY – D
3. The display will show either RMO (Room Out) and the station number, or RMS (Room Stay) and the
station number when connected to a guest station, depending on the data sent from PMS. The display will
show ADM (Administration) when connected to any station other than a guest station.
4. The RMO, RMS, and ADM displays do not appear when calling between nodes of CCIS network.
Page 48
Calling Station Number Display
Action
term
[L-9D] is governed by a timer. After the timer times out, the display
term
[T-18D].
The guest room station LCD will display:
(Time and Date)
- OR -
(Time and Date)
- OR -
(Time and Date)
HH:MM FX
(Time and Date)
HH:MM WATS
(Time and Date)
HH:MM TIE
(Time and Date)
HH:MM CCSA
(Time and Date)
term
[L-9D].
Result
ADM XXXX
DDD
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
>>>
OPR
>>>
X
>>>
X
>>>
X
>>>
X
>>>
X
>>>