Replacing Fuses
Replacing Fuse Block Fuse
The electrical system is protected by fuses, and requires no
maintenance. If a fuse blows, check the component or circuit
for a malfunction or short.
1. Pull out the open fuse.
2. Replace the open fuse with a new fuse
Note: Ensure that the correct-size fuse is installed.
1. Fuse
Replacing the Tail-light Fuse
Note: Your machine has separate fuses for the left and right
taillights.
1. Remove the cover from the fuse socket
(Figure
Figure 72
2. Fuse slot
(Figure
72).
1. Cover
2. Fuse
73).
2. Remove the open fuse
3. Insert the new fuse into the socket until the fuse is fully
seated
Note: Use only a fuse that is rated for the same
current load as the fuse that you are replacing.
4. Assemble the cover onto the fuse socket
27
Figure 73
3. Fuse socket
(Figure
73).
(Figure
73).
(Figure
73).