Maintenance - Toro 41250 Installation Instructions Manual

Using the Horn
Push down on the horn button to sound the horn
Figure 67
1. Horn button
Using the Turn Signals
Move the turn-signal switch up to indicate a right-turn signal
(Figure 68).
Move the turn-signal switch down to indicate a left-turn
signal (Figure 68).
Figure 68
1. Turn-signal switch

Maintenance

(Figure 67).
Replacing Light Bulbs
Replacing a Headlight Bulb
1. Ensure that the light switch is in the O
2. Remove the 6 screws securing the headlight
3. Remove the headlight cover
1. Screws
4. Remove the light bulb with the open circuit across the
filament wire.
5. Install the new light bulb.
6. Secure the headlight cover with the 6 screws.
25
position.
FF
(Figure
(Figure 69).
Figure 69
2. Headlight-lamp cover
69).