Toro 41250 Installation Instructions Manual page 22

14
Installing the Seat Lock
Parts needed for this procedure:
1 Lock-mount bracket
1 Latch
1 Grip
1
Hex-head screw (12 x 30 mm)
1 Locknut (12 mm)
Procedure
1. Remove the hairpin from the clevis pin
Figure 55
1. Clevis pin
2. Spring
2. Remove the clevis pin and spring from the latch
55).
3. Partially insert the clevis pin through the lock bracket
(Figure 56).
Figure 56
1. Clevis pin
2. Lock bracket
(Figure 55).
3. Hairpin
4. Latch
(Figure
3. Outboard-seat gusset
4. Align the lock bracket and the clevis pin through the
hole of the outboard-seat gusset
5. Align the holes in the latch with the holes in the seat
gussets (Figure 57).
1. Seat gussets
6. Partially move the clevis pin inward through the hole in
the seat latch (Figure
1. Clevis pin
7. Install the spring onto the clevis pin
1. Clevis pin
22
(Figure 56).
Figure 57
2. Latch
58).
Figure 58
2. Seat latch
(Figure 59).
Figure 59
2. Spring