Table of Contents
Advertisement
8
Installing the Flasher Module
and the Main-Block Fuse
Parts needed for this procedure:
1
Flasher module
1
Push-in fastener
1
Fuse (15 A)
Installing the Flasher Module
1. Align the flasher module with the hole in the frame of
the machine
(Figure
2. Insert the push-in fastener through the hole in the
flasher module and the frame of the machine
22).
Figure 22
1. Flasher module
22).
(Figure
2. Push-in fastener
Installing the Main-Block Fuse
Insert the fuse into the main-block frame
1. Fuse (15 A)
12
(Figure
23).
Figure 23
2. Main-block frame
Advertisement
Table of Contents
