Table of Contents
Advertisement
Figure 33
1. 6-socket connector
2. 6-pin connector
5. Repeat step
4
for the left headlight.
6. Assemble the hose cover to the floor of the operator's
platform with the 2 bolts that you removed in
removed in step
1
of
Turn-Signal (page
14).
Connecting the Wire Harness to the
Flasher Module
1. Route the harness leg with the 6-socket connector to
the 6-blade connector of the flasher module
34).
Figure 34
1. Flasher module
2. 6-socket connector
2. Plug the socket connector into the flasher module.
3. Right headlight
Routing the Wire Harness to the
(Figure
3. 6-blade connector
Routing the Wire Harness to the
Taillights
1. Route the tail light leg of the wire harness from the
flasher module rearward along the right-frame tube
between the frame tube and the engine
1. Flasher module
2. Right-frame tube
2. Route the wire harness along the right-frame channel
adjacent to the tank
1. Wire harness
3. Route the wire harness across the boom-valve bracket
(Figure
37).
16
(Figure
Figure 35
3. Engine
(Figure
36).
Figure 36
2. Tank
35).
Advertisement
Table of Contents
