Table of Contents
Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
11
12
13
Description
No parts required
No parts required
Headlight support
Bolt (5/16 x 2-1/4 inch)
Washer (5/16 inch)
Flanged locknut (5/16 inch)
Headlight
Rear-light bracket (left)
Rear-light bracket (right)
Rear-light assembly
Decal
Speed sign
Flange-head bolts (5/16 x 3/4 inch)
Flange locknuts (5/16 inch)
Data plate
Rivet (5 x 10 mm)
Turn-signal switch
Hose clamp
Horn assembly
90° bracket
Flange-head screw (5/16 x 3/4 inch)
Flange locknut (5/16)
Flasher module
Push-in fastener
Fuse (15 A)
Wire harness
Cable tie
License-plate light
Screw (#10 x 5/8 inch)
Locknut (#10)
Hazard switch
Horn switch
Button cover
3-position switch
Light-switch decal (plain)
No parts required
Qty.
–
Prepare the machine.
–
Remove the seat.
1
3
3
3
Install the front and rear lights.
2
1
1
2
3
1
Install the license plate brackets and
speed signs.
2
2
1
Install the data plate.
4
1
Install the turn-signal switch.
1
1
1
Install the horn.
1
1
1
Install the flasher module and the
1
main-block fuse.
1
1
Route and install the wire harness to the
machine.
6
1
1
Install the license plate light.
2
1
Install the hazard switch.
1
1
Install the light switch and the horn
button.
1
1
–
Connect the battery.
2
Use
Advertisement
Table of Contents
