Points To Note After Replacing Pressure Belt Unit - Canon imagePRESS C800 Series Troubleshooting Manual

6) Install the removed parts in reverse order.
7) Clear the counter.
Service Mode > COPIER > Counter > DRBL-1 > FX-BLT-U (Fixing Belt Unit parts counter)
[Reference] The following items are cleared when the above counters are cleared.
Service Mode > COPIER > Display > FIXING > FX-U-TM1
Service Mode > COPIER > Display > FIXING > FX-U-TM2
Service Mode > COPIER > Display > FIXING > FX-U-TM3
Service Mode > COPIER > Display > FIXING > FX-U-TM4
Service Mode > COPIER > Display > FIXING > FX-U-TM5
Service Mode > COPIER > Display > FIXING > FX-U-STR
Service Mode > COPIER > Display > FIXING > FX-R-TM
Service Mode > COPIER > Counter > FIXING > FX-RF-RL
Service Mode > COPIER > Counter > CLEANING > FX1-RFRL

1.1.7.1.69 Points to note after replacing Pressure Belt Unit

[ Manual-related ]
Description
Please explain the actions to take after replacing the Pressure Belt Unit.
Field Remedy
1) Apply grease (SE1107) to the tooth surfaces [A] of the 6 gears [1] of the Fixing Belt Unit.
- Range/amount of grease to apply: Amount of grease to cover grease-applicable area on the gear teeth surface
Display Fix Belt Unit STBY total run time
Display Fix Belt Unit running time: 321mm/s
Display Fix Belt Unit running time: 280mm/s
Display Fix Belt Unit running time: 160mm/s
Display Fix Belt Unit running time: 140mm/s
Display Fixing Belt displacement control steering set VL log
Display Fix Refresh Roll total operation times
Fixing Refresh Roller parts counter
Fixing Refresh Roller cleaning counter
Chapter 1
0031-6470
1-177