Chapter 1
2-8)Open the front cover, remove the screw[2] and the tray B upper limit stopper[1].
2-9)Uplift the tray B[2] paying attention not to let it strike to the tray A[1].
2-10)Remove the 2 screws[2] while lowering the shutter[1] in the direction of arrow, remove the 5 screws[4] and the stack wall (lower)[3].
2-11) Open the edge saddle[2] and the 6 wire saddles[3] to release the cable, and disconnect the 3 connectors[4].
2-12)Remove the 4 screws[1] and the 2 pins[3], and remove the neat stack unit (lower)[2].
1-49